Ir directamente al contenido
Notes on the use of the remote control

Notes on the use of the remote control

When you have been using your smart toilet for a while, do you find that some of the automatic functions don't work properly?

The reason for this failure is very likely to be due to misuse of the remote control leading to the automatic function is closed, when the intelligent toilet intelligent automatic function is closed, you can open the automatic function according to the following operation:

1. Turn on the automatic lid opening function - For the following models:

E16/E16BP/E18PRO/U8PRO/G20/G20PRO/W20

Long press the “ Open/Close Seat” button to open/close the automatic lid open/close function.

G18-SE/G18/G18-PRO/DP7-SE/DP7/DP7-PRO/IX7-SE/IX7/IX7-PRO

Simultaneously press the "Nozzle Cleaning +H/C Massage ” button on the remote control for about 3~5 seconds to open/close the automatic lid opening function.

 

2. Turn on the Auto Flush function - For the following models:

E16/E16BP/E18PRO/U8PRO/G20/G20PRO/W20

Long press the “Full Flush” button to turn on/off the auto-flush function.

 

3. Turn on the pre-wetting function-For the following models:

E16/E16BP/E18PRO/U8PRO/G20/G20PRO/W20

Press and hold the “Stop/Save Energy” button and press the “Full Flush” button to turn on/off the automatic pre-wetting function. When the automatic pre-wetting function is turned on, the pre-wetting function will be executed when the user is detected to sit down. (Only for toilets with automatic pre-wetting function).

 

4. Turn on the Foot Sense Function - For the following models:

E16/E16BP/E18PRO/U8PRO/G20/G20PRO/W20

Long press the “Half Flush” button to turn on/off the foot sensor function. The foot sensor will turn off when the user sits down. (Only for toilets with foot sensor function).

 

5.Turn on the automatic deodorizing function - For the following models:

E16/E16BP/E18PRO/U8PRO/G20/G20PRO/W20

Short press the “Deodorizer” button to turn on/off the automatic deodorizing function. The deodorizing function will stop in dry condition. (This function is on by default).

 

6. Turn on the automatic night light function - For the following models:

E16/E16BP/E18PRO/U8PRO/G20/G20PRO/W20

Intelligent Mode: Long press the “Night Light” button to enter the Intelligent Mode (the night light will go on and off according to the surrounding light). If the product is in smart mode, short press the “Night Light” button to exit smart mode.

 

7.Turn on the silent mode - For the following models:

E16/E16BP/E18PRO/U8PRO/G20/G20PRO/W20

Press and hold the “Stop/Energy Saving” button, then press the “Front Wash” button to turn on/off the silent mode.

Carrito 0

Su carrito está vacío.

Empieza a comprar